Shape variation and sex differences of the adult human mandible evaluated by geometric morphometrics.

In cases of osseous defects, knowledge of the anatomy, and its age and sex-related variations, is essential for reconstruction of normal morphology. Here, we aimed at creating a 3D atlas of the human mandible in an adult sample using dense landmarking and geometric morphometrics. We segmented 50 male and 50 female mandibular surfaces from CBCT images (age range: 18.9-73.7 years). Nine fixed landmarks and 510 sliding semilandmarks were digitized on the mandibular surface, and then slid by minimizing bending energy against the average shape. Principal component analysis extracted the main patterns of shape variation. Sexes were compared with permutation tests and allometry was assessed by regressing on the log of the centroid size. Almost 49 percent of shape variation was described by the first three principal components. Shape variation was related to width, height and length proportions, variation of the angle between ramus and corpus, height of the coronoid process and inclination of the symphysis. Significant sex differences were detected, both in size and shape. Males were larger than females, had a higher ramus, more pronounced gonial angle, larger inter-gonial width, and more distinct antegonial notch. Accuracy of sexing based on the first two principal components in form space was 91 percent. The degree of edentulism was weakly related to mandibular shape. Age effects were not significant. The resulting atlas provides a dense description of mandibular form that can be used clinically as a guide for planning surgical reconstruction.

How geographical origin and dietary habits interact with the shape of cortical mandibular sections? A geometric morphometrics study in an archaeological context.

OBJECTIVE: Mandibular shape is strongly influenced by biomechanics, particularly during dietary shifts that often occurred in past populations. The relationship is considered extremely complex as development of the mandible is a multifactorial process. Since cortical bone distribution is purportedly more biomechanically sensitive than external shape, comparison of its distribution in past populations can provide new input to understand this complex relationship. The present study examined the effects of geographical origin and dietary habits on the internal anatomy of the mandibular corpus and symphysis. DESIGN: A morphometric analysis was conducted on 72 mandibles from different populations, sampled by their geographical origin and subsistence strategies. Procrustes ANOVAs were performed to test the impact of section-plane location, geographical origin, and dietary habits on the groups' shapes. RESULTS: The specimens' geographical origin and dietary habits had a significant effect on the shapes of the sections (Generalized Goodall F-test, F = 3.2745, df = 6, 304: p < 0.001 and F = 3.7007, df = 4, 306: p < 0.001). CONCLUSION: Geographical origin and dietary habits influenced the shape of the mandibular sections in our sample. These relationships become more complex when analysed in isolated sections. Indeed, this study revealed that symphysis sections could be predominantly influenced by individual variables, whereas intermediate sections of the corpus could be predominantly influenced by populational variables. Future studies could focus on specific sections to better identify the specific "rules of dependence" in each cross-section.

What is a trait? Lessons from the human chin.

The chin, a distinguishing feature of Homo sapiens, has sparked ongoing debates regarding its evolutionary origins and adaptive significance. We contend that these controversies stem from a fundamental disagreement about what constitutes a well-defined biological trait, a problem that has received insufficient attention despite its recognized importance in biology. In this paper, we leverage paleoanthropological research on the human chin to investigate the general issue of character or trait identification. First, we examine four accounts of the human chin from the existing literature: the mandibular differential growth byproduct, the bony prominence, the inverted T-relief, and the symphyseal angle. We then generalize from these accounts and propose a three-stage framework for the process of character identification: description, detection, and justification. We use this framework to reinterpret the four accounts, elucidating key points of contention surrounding the chin as well as other morphological characters. We show that debates over the chin carry broad and important biological implications that extend beyond this trait and that are not mere semantic issues of definition.

Introducing a novel intraoral mandibular nerve block technique for loco-regional analgesia in camels (Camelus dromedarius): a cadaveric study using computed tomography.

The aim of this study was to introduce a novel intraoral technique for performing mandibular nerve blocks in dromedary camels (Camelus dromedarius). In this study, 18 adult camel skulls of varying ages and breeds were examined to determine the position of the mandibular foramen. Using a Vernier caliper, three dimensions in millimeters were measured: (1) the distance between the mandibular foramen (MF) and the caudal edge of the third molar tooth at the occlusal surface level, (2) the distance between the MF and the rostral edge border of the mandible's ramus (RER) at the occlusal surface level, and (3) the distance between the MF and the ventral margin border of the mandible (VM). The technique was evaluated using five intact camel cadaver heads (n = 5), and a total of ten mandibular nerve blocks were described. An 18-gauge 80-mm Tuohy needle was inserted into the mouth commissure and advanced caudally while injecting a saline-methylene blue solution. The accuracy of the injection was confirmed through the infiltration of the contrast dye into the target area using computed tomography (CT) and post procedural dissection. Anatomical study of the mandibular nerve site was performed to aid the blind insertion of the needle. The findings contribute to the development of veterinary anesthesia techniques and provide anatomical considerations for clinicians performing oral surgeries in sedated camels. The results demonstrated the successful implementation of the intraoral technique, highlighting its efficacy and reliability in achieving local anesthesia for oral surgeries involving the lower jaw and teeth in sedated camels. Further research studies are needed to evaluate the long-term efficacy and safety of the technique and to compare it with existing approaches.

Identifying the Anatomical Variations of the Inferior Alveolar Nerve with Magnetic Resonance Imaging.

BACKGROUND: The inferior alveolar nerve (IAN) is located in the mandibular canal (MC). It is critical to evaluate the position of the MC during treatment planning to prevent intra or postoperative complications. AIMS: This retrospective study aimed to identify the anatomy and anatomical variations of the IAN using soft tissue imaging (pulse sequence magnetic resonance imaging [MRI]). MATERIALS AND METHODS: This study was designed as a retrospective Consolidated Standards of Reporting Trials (CONSORT) study. In total, 220 MR images were obtained. Nutrient canals (NCs) were classified as intraosseous and dental NCs, while bifid MCs (BMCs) were classified as forward, retromolar, and buccolingual canals. IBM SPSS Statistics 22 was used. Kolmogorov-Smirnov and Shapiro-Wilk tests, descriptive statistical methods (means, standard deviations, and frequencies), and the Chi-square test were used. Statistical significance was set at P < 0.05. RESULTS: In total, 220 patients (172 females and 48 males) were evaluated. NCs were present in 92.3% of all MCs and were significantly higher in patients aged <25 years. BMCs were observed in 106 patients (24.1%). The most common BMC of MC/IAN was in the forward canal (14.4%), followed by the retromolar canal (7.5%). CONCLUSION: Although previously, the dental canal was considered as an anatomical variation, this study revisited the classification and suggested that dental canals are anatomical structures.

Understanding the ant's unique biting system can improve surgical needle holders.

Mechanical grasping and holding devices depend upon a firm and controlled grip. The possibility to improve this gripping performance is severely limited by the need for miniaturization in many applications, such as robotics, microassembly, or surgery. In this paper, we show how this gripping can be improved in one application (the endoscopic needle holder) by understanding and imitating the design principles that evolution has selected to make the mandibles of an ant a powerful natural gripping device. State-of-the-art kinematic, morphological, and engineering approaches show that the ant, in contrast to other insects, has considerable movement within the articulation and the jaw´s rotational axis. We derived three major evolutionary design principles from the ant's biting apparatus: 1) a mobile joint axis, 2) a tilted orientation of the mandibular axis, and 3) force transmission of the adductor muscle to the tip of the mandible. Application of these three principles to a commercially available endoscopic needle holder resulted in calculated force amplification up to 296% and an experimentally measured one up to 433%. This reduced the amount of translations and rotations of the needle, compared to the needle's original design, while retaining its size or outer shape. This study serves as just one example showing how bioengineers might find elegant solutions to their design problems by closely observing the natural world.

Mandible mechanical properties and composition of the larval Glossosoma boltoni (Trichoptera, Insecta).

Insect feeding structures, such as mandibles, interact with the ingesta (food or/and substrate) and can be adapted in morphology, composition of material and mechanical properties. The foraging on abrasive ingesta, as on algae covering rocks, is particularly challenging because the mandibles will be prone to wear and structural failure, thus suggesting the presence of mandibular adaptations to accompany this feeding behavior. Adaptations to this are well studied in the mouthparts of molluscs and sea urchins, but for insects there are large gaps in our knowledge. In this study, we investigated the mandibles of a grazing insect, the larvae of the trichopteran Glossosoma boltoni. Using scanning electron microscopy, wear was documented on the mandibles. The highest degree was identified on the medial surface of the sharp mandible tip. Using nanoindentation, the mechanical properties, such as hardness and Young's modulus, of the medial and lateral mandible cuticles were tested. We found, that the medial cuticle of the tip was significantly softer and more flexible than the lateral one. These findings indicate that a self-sharpening mechanism is present in the mandibles of this species, since the softer medial cuticle is probably abraded faster than the harder lateral one, leading to sharp mandible tips. To investigate the origins of these properties, we visualized the degree of tanning by confocal laser scanning microscopy. The autofluorescence signal related to the mechanical property gradients. The presence of transition and alkaline earth metals by energy dispersive X-ray spectroscopy was also tested. We found Ca, Cl, Cu, Fe, K, Mg, Mn, P, S, Si, and Zn in the cuticle, but the content was very low and did not correlate with the mechanical property values.

Micro computed tomography (Micro-CT) characterization of root and root canal morphology of mandibular first premolars: a systematic review and meta-analysis.

INTRODUCTION: Mandibular first premolars are familiar with their varied root canal morphology, causing difficulties and challenges for successful endodontic procedures. This systematic review and meta-analysis aim to study the characterization of root and canal morphology of the first mandibular premolar using micro-computed tomography. METHODOLOGY: The literature search was conducted using electronic web databases like PubMed, Scopus, ScienceDirect and Cochrane with the chosen MeSH key words and data was retrieved until May 2023. Further to perform the statistical analysis, R v 4.3.1 software with "meta", 'metafor" "metaviz" " ggplot2" package was used, and results were represented by odds ratios (OR) and the percentage of forest plots along a 95 per cent confidence interval (CI). RESULTS: The total number of studies meeting the inclusion criteria was 13; these studies were conducted on mandibular first premolar using Micro-CT; the total sample size was 1817. To scan the sample, an X-ray micro-focus CT system (Siemens Inveon CT, Erlangen, Germany) was used in four studies and seven different machines were used in the respective studies. Mimics 10.01 software (Materialize, Leuven, Belgium) and NRecon v.1.6.9 software (Bruker, Kontich, Belgium) were commonly operated. The minimum and maximum voxel size ranges between 11.94 and 50 µm. Vertucci's classification was frequently used (9), while one study applied Ahmed et al. and Vertucci's classification. CONCLUSION: This systematic review provides essential information about the root and canal configurations, radicular grooves, accessory canals, and apical foramina through Micro-CT, aiming to improve the accuracy of endodontic treatment and help practitioners.

Evaluation of three-dimensional reconstructed palatal morphology in skeletal class III subjects with different vertical patterns using cone beam computed tomography.

BACKGROUND: This study aims to evaluate the difference of three-dimensional (3D) reconstructed palatal morphology between subjects with skeletal Class III and skeletal Class I in different vertical patterns using cone beam computed tomography (CBCT). METHODS: In this study, 89 subjects with skeletal Class III (49 females, 40 males; 25.45 ± 3.81 years) and 85 subjects with skeletal Class I (45 females, 40 males; 23.95 ± 4.45 years) were collected retrospectively and divided into hyperdivergent, normodivergent and hypodivergent groups. Dolphin software was used to reorient the CBCT images of these subjects. After segmenting 3D object of maxilla from the 3D skull by ProPlan software, Geomagic Studio was used to reconstruct 3D palatal morphology and establish an average 3D palatal morphology for each group. The differences of 3D palatal morphology between different groups were compared by deviation patterns on 3D colored map analysis. RESULTS: 3D colored map analysis showed the posterior part of male's palate was higher and wider than that of female's palate in skeletal Class III subjects. In skeletal Class III subjects, males with hyperdivergent pattern had a higher and narrower palate compared with hypodivergent subjects, while females with hyperdivergent had a higher but not obviously narrower palate compared with hypodivergent subjects. In the similar vertical patterns, skeletal Class III subjects had a flatter but not narrower palate compared with skeletal Class I subjects, along with a smaller palate volume. CONCLUSIONS: This method allows more intuitive between-group comparisons of the differences of 3D palatal morphology. In skeletal Class III subjects, as the vertical dimension increased, the palate tends to be higher and narrower. Therefore, the influence of vertical patterns on the palatal morphology should be fully considered in the orthodontic and orthognathic treatment of skeletal Class III subjects.

Dental morphology in Homo habilis and its implications for the evolution of early Homo.

The phylogenetic position of Homo habilis is central to debates over the origin and early evolution of the genus Homo. A large portion of the species hypodigm consists of dental remains, but they have only been studied at the often worn enamel surface. We investigate the morphology of the H. habilis enamel-dentine junction (EDJ), which is preserved in cases of moderate tooth wear and known to carry a strong taxonomic signal. Geometric morphometrics is used to characterise dentine crown shape and size across the entire mandibular and maxillary tooth rows, compared with a broad comparative sample (n = 712). We find that EDJ morphology in H. habilis is for the most part remarkably primitive, supporting the hypothesis that the H. habilis hypodigm has more in common with Australopithecus than later Homo. Additionally, the chronologically younger specimen OH 16 displays a suite of derived features; its inclusion in H. habilis leads to excessive levels of variation.

Comprehensive view of the posterior mandibular ridge morphology.

The anatomy of the posterior mandibular ridge and the anatomical structures present in this region are important in the planning and execution of dental treatments. The aim of this study was to examine all forms of alveolar ridge in detail to provide a comprehensive description of the posterior mandibular ridge. This study included 1865 cross-sectional sections of cone beam computed tomography scans obtained from 511 Iranian patients with a mean age of 48.14 years (280 female, 231 male). The alveolar ridge was described based on the ridge shape, including the existence and location of convexity and concavity. The morphology of the posterior mandibular ridge was categorized into 14 types: straight, pen shape, oblique, D type, B type, kidney, hourglass, sickle, golf club, toucan beak, tear, cudgel, basal, and saddle. Among the alveolar ridge types, the straight type in the premolar region and toucan beak type in the molar region were most frequent in the female, male, dentulous, and edentulous ridges. This study found significant differences in alveolar ridge morphology according to sex, dental status, and region of the ridge (all P < 0.001). In conclusion, the morphology of the alveolar ridge varies significantly between the sexes and between dentulous and edentulous locations.

Investigation of the variability of the pterygomandibular space from the point of view of the target point of the inferior alveolar nerve block.

INTRODUCTION: A thorough knowledge of the anatomy and variability of the pterygomandibular space (PMS) is essential to the success of local anesthesia. This study is aimed at determining the volume of the PMS depending on the shape of the skull, face and mandible using the computed tomography (CT). MATERIALS AND METHODS: anonymized computed tomograms of 48 adult patients were analyzed, the indicators of the cranial index (CI), facial index (FI) according to Yzard, the high lengthy index of the mandible (HLI), the latitudinal-altitude index of the mandible (LAI), the longitudinal latitude index of the mandible (LLI) were calculated. RESULTS: Differences in the volume of the PMS were found depending on the shape of the skull, face and mandible. When determining the CI, the largest volume of space on the right was observed with brachycrania (2.05 ml), on the left - with mesocrania and brachycrania (2.0 ml each). With regard to the FI, the largest volume of space was obtained with medium face on the right side (2.03 ml) and broad and medium types of faces (2.0 ml each) on the left. When calculating the indicators for the shapes of mandible, the largest volume of space was found in the brachygenic (2.05 ml), leptogenic (1.98 ml) and platigenic (1.97 ml) shapes on the right and leptogenic and platigenic shapes on the left (2.0 ml each). There were statistically significant differences in the volume of the right side of the PMS between different shapes according to the cranial index (F = 5.075; p = 0.0095). The most pronounced difference was present between samples with brachycrania and dolichocrania: 0.35 mm³ (95% CI 0.05-0.65); p = 0.0188. There was a statistically significant correlation with sex for parameters on both the right and left sides. The values of indicators in men exceeded those of measurements obtained from women. CONCLUSION: The data obtained determine the differences in the volume of the PMS in individuals with different shapes of the skull, face and mandible, as well as sex differences. Thus, indicating the need to take into account these features when choosing the required amount of anesthetic in clinical practice. The average volume of the PMS space, according to our data, is 1.8-2.0 ml, which is consistent with the clinical data described in the literature.

Comparison of different 3D printers in terms of dimensional stability by image data of a dry human mandible obtained from CBCT and CT.

OBJECTIVES: To manage the mandibular traumas, for the expression of the complex anatomy or pathology in education of health sciences related branches, a model of the traumatized mandible is indispensable. For these, different 3D-print-technologies can be used. The aim of this study is, to measure how close these 3D-printed-models are to human-mandible (trueness) and the effectiveness of CT and CBCT at this point. STUDY DESIGN: One-dry-human-mandible and 10-models manufactured by five different 3D-printers in four different-kinds of additive-manufacturing technology (Fused-Deposition-Modeling (FDM), Stereolithography (SLA), Binder-jetting (BJ), Polyjet (PJ)) were used, five-anatomic-landmarks and eight-distances were measured and evaluated. Mandible's data were constructed based on DICOM-3.0 data from CBCT and CT scans. Images were opened in MIMICS (software-program). RESULTS: Study compared the devices that produced models with the same dry human-mandible. It was seen that the model with the highest margin of error (132.5 mm) was manufactured by Fused-deposition-modeling device using CT-data. In terms of distance to real-data, the model with the lowest error was generated by Binder-Jetting (ZCorp) with CBCT-data. Models produced with CBCT-data are closer to dry-human-mandible than models with CT-data. CONCLUSION: The current study shows that CBCT generates significantly better data than CT in producing mandibular models. The first choice for manufacturing of human mandible is BJ and the second choice is the technology of SLA.

Sex estimation based on mandibular measurements.

Medical imaging and machine learning are beneficial approaches in physical and forensic anthropology. They are particularly useful for the development of models for sex identification based on bone remains. The present study uses machine learning algorithms to create models for sex estimation based on mandibular measurements. The sample included head CT scans of 239 adult Bulgarians (116 males and 123 females). Three-dimensional coordinates of 45 landmarks of the mandible were acquired from segmented polygonal models of the skulls of these individuals. Two datasets of mandibular measurements were assembled. The first dataset included 51 measurements: linear, projective, and angular measurements. The second dataset included 990 interlandmark distances. Seven machine learning algorithms (Support Vector Machines, Neural Network, Naïve Bayes, Random Forest, J48, JRip, and Logistic Regression) were applied to the two datasets, and the classification accuracy was evaluated by 10x5-cross-validation. The selection of the best subsets of attributes specific to each of the abovementioned algorithms was done based on the attribute importance evaluated by an attribute selection scheme. In general, the sub-symbolic algorithms achieved higher results than the symbolic ones, except for the logistic regression. The best classification model was learnt by the Support Vector Machines algorithm, which achieved an accuracy of 95.3% on a dataset described by 19 interlandmark distances. In both datasets, the application of advanced attribute selection has led to an increase in the classification accuracy of all algorithms used in the experiments.

Comparison of mandibular buccal shelf morphology between adolescents and adults with different vertical patterns using CBCT.

OBJECTIVE: This retrospective study aimed to analyze the anatomical structure of the mandibular buccal shelf (MBS) in adolescents and adults with different vertical patterns to determine the optimal location for miniscrew insertion in orthodontic treatment. METHODS: Cone-beam computed tomography (CBCT) scans of 230 patients were utilized for measurements. The morphology and thickness of alveolar bone at the MBS were measured. Two-way ANOVA and regression analysis were conducted to analyze the influencing factors on alveolar bone and cortical bone thickness. RESULTS: Age had a significant effect on alveolar bone thickness (level I: F = 62.449, level II: F = 18.86, p < 0.001), cortical bone thickness (level II: F = 18.86, p < 0.001), alveolar bone tilt (F = 6.267, p = 0.013), and second molar tilt (F = 6.693, p = 0.01). Different vertical patterns also influenced alveolar bone thickness (level I: F = 20.950, level II: F = 28.470, p < 0.001), cortical bone thickness (level I: F = 23.911, level II: F = 23.370, p < 0.001), and alveolar bone tilt (F = 27.046, p < 0.001). As age increased, the alveolar bone thickness at level I decreased by 0.096 mm and at level II decreased by 0.073 mm. Conversely, the thickness of alveolar bone at level I and level II increased by 0.06 mm and 0.075 mm, respectively. The cortical bone thickness at level I and level II increased by 0.024 mm and 0.29 mm, respectively. However, the alveolar bone thickness decreased by 0.931 mm and 1.545 mm at level I and level II, and the cortical bone thickness decreased by 0.542 mm and 0.640 mm at level I and level II, respectively. CONCLUSION: Age, different vertical patterns, alveolar bone inclination, and different shapes of MBS significantly affected the thickness of alveolar bone and cortical bone in the MBS area. Notably, only alveolar bone thickness and cortical bone thickness at level II were affected by age and different vertical patterns simultaneously. These findings can provide valuable insights for orthodontic practitioners in selecting the most suitable location for miniscrew insertion during treatment planning.

Symphyseal morphology and jaw muscle recruitment levels during mastication in musteloid carnivorans.

In studies of mammalian mastication, a possible relationship has been proposed between bilateral recruitment of jaw adductor muscle force during unilateral chewing and the degree of fusion of the mandibular symphysis. Specifically, species that have unfused, mobile mandibular symphyses tend to utilize lower levels of jaw adductor force on the balancing (nonchewing) than the working (chewing) side of the head, when compared to related species with fused symphyses. Here, we compare jaw adductor recruitment levels in two species of musteloid carnivoran: the carnivorous ferret (unfused symphysis), and the frugivorous kinkajou (fused symphysis). During forceful chewing, we observe that ferrets recruit far more working-side muscle force than kinkajous, regardless of food toughness and that high working-to-balancing side ratios are the result of increased working-side force, often coupled with reduced balancing-side force. We propose that in carnivorans, high working-to-balancing side force ratios coupled with an unfused mandibular symphysis are necessary to rotate the hemimandible for precise unilateral occlusion of the carnassial teeth and to sustain laterally oriented force on the jaw to engage the carnassial teeth during shearing of tough foods. In contrast, the kinkajou's flattened cheekteeth permit less precise occlusion and require medially-oriented forces for grinding, thus, a fused symphysis is mechanically beneficial.

Sex Determination in the Contemporary Chilean Population by Mandible Analysis in Panoramic Radiographies / Estimación Sexual de la Población Chilena Contemporánea Mediante Análisis de la Mandíbula en Radiografías Panorámicas

SUMMARY: Sex identification of a deceased human individual by means of the mandible is very important for forensic dentistry. The aim of the present study was to determine the sex of Chilean individuals by mandible analysis in panoramic radiographies. Linear and angular parameters of the mandible were analyzed from panoramic radiographies (PR). The study included PR of adult Chilean individuals, of both sexes, with optimum solution and contrast, and which allowed the angles and rami of the mandible to be viewed. Sex was determined by univariate and bivariate discriminant function analysis. The sample consisted of 594 PR of individuals aged between 18 and 84 years. The best sex predictor using univariate discriminant function analysis was the mandibular ramus height (MRH) (74.1 %), followed by the distance from the mental foramen - mandibular base (DMF-MB) (69.1 %) and the bicondylar breadth (BC) (66.7 %). The parameters that presented the lowest sex prediction were the angle of the mandible (AM) with 55.0 % and the distance between mental foramina (DMF) with 53.7 %. The best sex prediction was obtained by the step model of discriminant function analysis (80.2 %), including only three parameters: MRH, BC and DMF-MB. The parameters height of the mandibular ramus, bicondylar breadth and distance from the mental foramen - base of the mandible are good predictors of sex in Chilean individuals when used in conjunction; they are therefore indicated for sex determination in the contemporary Chilean population.

La identificación humana de un individuo fallecido a través de la mandíbula es muy relevante para la odontología forense. El objetivo de este estudio fue estimar el sexo de individuos Chilenos a través del análisis de la mandíbula, utilizando radiografías panorámicas. Fueron analizados parámetros lineales y angulares de la mandíbula, a través de radiografías panorámicas (RP). Se incluyeron RP de individuos chilenos adultos, ambos sexos, con solución y contraste óptimos, y que permitían la visualización de los ángulos y ramas de la mandíbula. Se realizó análisis por función discriminante univariada y bivariada para estimación del sexo. Fueron incluidas 594 RP de individuos entre 18 y 84 años. Para el análisis de función discriminante univariado, la altura de la rama mandibular (ARM) fue el parámetro más predictivo (74,1 %), seguido de la distancia foramen mentoniano - base de la mandíbula (DFM-BM) (69,1 %) y el ancho bicondilar (ABCo) (66,7 %). Los parámetros que presentaron menor predicción sexual fueron el ángulo de la mandíbula (AM) con un 55,0 % y la distancia inter-forámenes mentonianos (DIFM), con el 53.7 %. El análisis por pasos fue el modelo de análisis de función discriminante que presentó la mayor predicción sexual (79,5 %), en el cual fueron incluidos sólo tres parámetros: ARM, ABCo y DFM-BM. Los parámetros altura de la rama de la mandíbula, ancho bicondilar y distancia desde el foramen mentoniano hasta la base de la mandíbula son buenos predictores del sexo en individuos Chilenos cuando utilizados en conjunto y están indicados para estimar el sexo en la población chilena contemporánea.

Evaluation of safe areas for miniscrew use according to various skeletal anomalies with CBCT.

OBJECTIVES: We aimed to determine safe areas to apply miniscrews in the interradicular region of the maxilla and mandible in individuals with various sagittal skeletal malocclusions. MATERIALS AND METHODS: Cone beam-computed tomography images of 159 individuals were used. Individuals were divided into three groups: Class I, Class II, and Class III. In the sagittal plane, 3-6-9-mm apical sections were determined from the alveolar crest apex. The buccal cortical bone thickness, interradicular distance, and buccolingual bone distances were measured. RESULTS: In the buccal cortical bone thickness, we observed statistically significant differences between the classes except for the 1-1 region in the maxilla and all regions and sections in the mandible (p < 0.05). The differences in the buccolingual bone distance between classes were statistically significant, except for the 3-mm and 6-mm sections in the 3-4 and 4-5 regions of the maxilla, the 9-mm sections in the 1-2 and 2-3 regions, the 6-mm and 9-mm sections in the 3-4 region, and the 6-mm section in the 4-5 regions of the mandible (p < 0.05). The differences in the interradicular bone distance were statistically significant between the classes in all regions and sections of the mandible except the 6-mm sections in the 1-2 region and in all sections of the maxilla except the 6-mm sections in the 3-4 region (p < 0.05). CONCLUSIONS: We observed significant differences in the buccal cortical bone thickness, interradicular bone distance, and buccolingual bone distance among individuals. CLINICAL RELEVANCE: Understanding the anatomy of interradicular regions and preventing complications.

Tomographic analysis of relationship of mandibular morphology and third molars eruption.

BACKGROUND: Lower third molars (L3M) are the last teeth to erupt in the oral cavity. Uneruption of these teeth still raises questions about its causes, in the literature (1) genetic factors, (2) dental lamina activity and, mainly, (3) insufficient growth and development of the bone bases are included. While the lack of space theory influenced by mandibular morphology and size of L3M was argued to be the main reason for L3M impaction, there is a limitation in the literature in examining such association using more accurate tomographic analysis obtained from CBCT. This work aimed to evaluate the relationship between mandibular morphology and the eruption of L3M. METHODS: In this regard, 85 Cone Beam Computed Tomographies (CBCT), with 147 L3M, were selected from the archives of the Department of Surgery, Stomatology, Pathology and Radiology, Bauru School of Dentistry, obtained using an Accuitomo® Morita device and using the Dolphin Imaging 11.9 software. L3M eruption was related to linear measurements of jaw length (Co-Gn), retromolar space dimension (D2R), mesiodistal width of the L3M crowns, mandibular first molars (L1M) and mandibular canines (LC) and the angle mandibular (Ar-Go-Me). Independent samples t-test, chi-square tests and logistic regression were performed adopting a significance level of 5%. RESULTS: The average mandible length of 116.446 mm + 6.415 mm, retromolar space of 11.634 mm + 2.385 mm, mesiodistal size of the L3M of 10.054 mm + 0.941 mm, sum of the mesiodistal widths of the L1M and LC of 15.564 mm + 1.218 mm and mandibular angle of 127.23° + 6.109. There was no statistically significant association between these factors and the eruption. CONCLUSION: With the results obtained in this study, we conclude that the length and angle of the mandible, teeth size and dimension of the retromolar space are not associated with the L3M eruption.

Association of root morphology of mandibular second molars on panoramic-like and axial views of cone-beam computed tomography.

BACKGROUND: Knowledge about the anatomy and morphology of the root canal system is essential for successful surgical and non-surgical root canal treatments. However, precise assessment of the root morphology and anatomy is not often possible on two-dimensional radiographs. This study aimed to investigate the association of root morphology of mandibular second molars on panoramic-like and axial views of cone-beam computed tomography (CBCT). METHODS: This cross-sectional study evaluated 1,231 CBCT scans of mandibular second molars obtained between October 2018 and February 2022 that were retrieved from the archives of a private radiology clinic. Panoramic-like images were reconstructed from the CBCT scans. The root morphology of mandibular second molars was classified on panoramic-like images as type 1, 2, 3, 4, or 5. The root pattern on axial CBCT images was classified into three types of single, double and C-shaped. The association of root morphology on panoramic-like and axial CBCT views was analyzed by the Chi-square test and Fisher's exact test at 0.05 level of significance. RESULTS: Of all, 62.7% of mandibular second molars were type 1; out of which, 97.3% had a double-root pattern on axial CBCT images. Also, 28.6% of them were type 2; of which, 92.6% had a double-root pattern. Moreover, 3.9% were type 3; of which, 47.9% had a C-shaped pattern; 0.9% were type 4, and 45.5% of them showed a single-root pattern; 3.8% were type 5 with 76.6% of them showing a single-root pattern. The prevalence of C-shaped canals was higher in females, and most C-shaped canals had a C3 pattern. CONCLUSION: Root morphology on panoramic-like CBCT views had a strong association with the root canal pattern on axial CBCT views. According to the results, mandibular second molars with a type 3 morphology on panoramic-like CBCT images are highly probable to have a C-shaped canal.